| 翻訳と辞書 |
ICA IAR-35
The ICA IAR-35 is a Romanian glider designed and built in the 1980s primarily for aerobatics, though capable of general purpose use. Several production prototypes were constructed.
==Design and development==
The IAR-35 is an all-metal, single seat, short span glider developed for aerobatic flight. Its three spar shoulder wing, with metal ribs and bonded metal skinning, has a constant chord centre section and tapered outer panels. There is no dihedral on the centre section but 2° outboard. The whole trailing edge is occupied by all-metal, statically balanced ailerons, each fitted with an automatic trim tab. DFS (Schempp-Hirth) airbrakes extend both above and below the wings.〔
Its fuselage is a metal semi-monocoque with aluminium alloy framing and duralumin skin. The cockpit is ahead of the wing with the pilot under a long, single piece Perspex canopy. On the underside, below the wing there is a monowheel, fitted with a brake, which retracts behind a pair of doors. The IAR-35 also has a fixed, semi-recessed tailwheel and a skid under the nose. The wing tips are protected by small, sprung balance wheels. Its fuselage becomes more slender behind the wing, mounting a conventional empennage with tall, straight edged, swept vertical surfaces and a dorsal fillet. The rudder is statically balanced and has a vertical trailing edge. A braced tailplane is mounted forward on the fin, a little above the fuselage, carrying similarly balanced elevators fitted with trim tabs.〔
The IAR-35 first flew in May 1986.〔 Only a few were built but four remained on the Romanian civil register in 2010.〔
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「ICA IAR-35」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|